Parts

The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details

The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano’s current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It’s an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs - CNC machined from 6061-T6 aluminum with stainless steel bolt - Does not change the derailleurs total chain wrap capacity - Fits standard derailleur hangers only - Best used with Single or Double Setups - see manufacturer's site for more details

Thread together BB for 386EVO frames and 24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 24mm - Over Bearing Width: 91.5mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Weight: 133g Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86 – 92mm wide BB shell) and 24.00mm diameter spindle cranks: - BB386EVO - BB392EVO

Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x8 Flat Head Screws - Specialized Part #9890-4226 Note: This hanger has been updated to match Specialized Part #9890-4226 and will accommodate 28-tooth and larger cassette cogs. Shifting with smaller cassette cog ranges will not be adversely affected.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5

Wheels Manufacturing's PressFit 30 Bottom Brackets are an excellent direct replacement for SRAM, FSA and other PressFit 30 BBs. They are 100% made in the USA with machined aluminum cups for superior durability and your choice of standard sealed, angular contact or ceramic bearings (this model has sealed bearings). Wheels Manufacturing also exclusively uses Enduro bearings for excellent performance and longevity. Other great features of these stellar BBs include a 12% increase in bearing strength over standard models; serviceable bearings; dual exterior silicone rings for easy installation and to eliminate creaking; double-lip bearing seals; and even the highest quality grease appropriate for bottom bracket use and also more of it for smoother running and maximum durability!

Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear kit, 142x12mm Thru Axle - Mounting location: Rear kit - Attachment: Thru axle nut

Add a rear disc brake to your 2001 and later Trek, Klein or Gary Fisher bicycle with this International Disc Brake Mount. Please note, disc brake and disc compatible wheel hub sold separately.

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut

Lock rings for all TRP Centerlock Rotors

TRP Disc Brake Pads - Semi-Metallic, Steel Backed, For Hylex, Hylex RS, and HD-T190 Flat-Mount Calipers

Hydraulic hose with banjo fitting for TRP brakes.

- Includes: 2-Super Sticky Kush tape rolls, 2- Aluminum Laser Etched Powder Coated Star Plugz, 2- High End Rubberized Finish Tapes - Material: PU—Length: 2160mm Width: 30mm Thickness: 3mm - Highly resistant to UV rays, climate, and sweat - Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions - Star Plugz: 100% aluminum bar plugs

- Nylon clips - Woven straps - For ATB or hybrid use

Sunlite's Adjustable Stem adjusts from 0 to +60 degrees so that you can place your handlebars wherever they are most comfortable. It boasts light and durable aluminum construction with steel bolts. It fits on 1- and 1 1/8-inch forks and accepts 25.4mm- and 31.8mm-diameter handlebars too, with included shims. Plus, its 2-bolt clamp makes changing bars easy and holds fast.

• Forged aluminum • Integrated micro-adjust seat clamp

•Mountain and road touring cantilever design •Forged aluminum construction •Linear spring with quick tool adjust •185g each

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Forged alloy construction •3 finger •Pulls two brake cables with one lever •136g each

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Forged alloy construction •4 finger •205g pair

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

- One-piece alloy body - Chromoly spindle - Toe clip compatible - Dual-sided design - 320g pair - 9/16-inch spindle

• Square taper interface • Only includes left crank

• Square taper interface • Only includes left crank • 175mm length

- Horizontal square interface - Only includes left crank

Building up an urban fixie or townie bike? Then you just have to have the classic Bull Horn Bars from Sunlite. They're made from aluminum with a steel center sleeve, so they're light, stiff and durable.

- Replacement link wire for cantilever brakes

- DT Swiss cartridge bearings - Sold in pairs

- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver

Yep, these are the same old-school grips from back in the day. Now you see them on skinny-barred messenger fixies from NYC to San Fran. Sunlite's Classic grips come in a rainbow of colors to match any scheme on any bike. The large pads provide fat cushion for your hands and the soft rubber gives you a slip-free grip.

- MTB or Road - 1.5 x 2667mm - Galvanized

- One-piece resin body - Chromoly spindle - Toe clip compatible - 366g pair

- One-piece bottom bracket cup set - Bearings included - Shell: 68mm - Spindle Type: OPC - Cup Material: Steel - Weight: 265 grams

• Aluminum • CNC-finished

- 8x1mm Allen head

- Fits cantilever brakes - Sold individually

• All weather compound • Cantilever post style • Offset Post • Black • 70mm

- Rubber - Color: Black

- Steel cable noodle with alloy end caps - Includes plastic liner

Our Enduro Grips are designed to outperform the rigors of all mountain and enduro riding. That's why they feature a thicker degree of padding and a non-slip texture for enhanced shock absorption and lasting comfort. Not stopping there, we amplified these characteristics via a dual-density compound. As we mentioned, the inner core is thicker than your average grip in order to deal with shock, while the outer part has a softer density to better absorb vibrations. And to put the "grip" into these grips, we also gave them a textured pattern for no-slip performance on the trail. Put it all together, and you're looking at grips that are going to leave your hands comfortable and fresh over your whole ride. - Softer density on the outside for superior vibration damping. - Dual-density compound for improved comfort and bar adherence. - Softer, thicker padding for heightened comfort. - Higher-density inner core for secure bar attachment. - Textured pattern provides non-slip performance. - Diameter: 30mm

Specialized's Enduro XL Locking Grips boast an oversize diameter for maximum control in even the most challenging situations. Their soft-density, textured outers provide an outstanding grip and superb comfort, while the firm inners and locking clamps built into the ends keep the grips securely in place on your handlebars.

Specialized's Expert Alloy Shallow Bend Handlebar offers the same ergonomic benefits as the S-Works version, delivering a strong and affordable bar with no compromise. - Premium butted aluminum, high-strength design - Ergonomic top perch alleviates pressure on hands; smooth transitions for fit & comfort - Shallow bend drop design: 123mm drop x 75mm reach - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls - Front of bar optimized for dual-cable routing

The Shimano FD-R7000 11-speed front derailleur offers lighter front shifting with a natural stroke feel. The derailleur's cage design is optimized to perform with disc brake road bikes, while multiple cable routing options and integrated cable tension adjustment allow for precise setup and easy adjustments. As part of Shimano's 105 R7000 series, this front derailleur is ideal for beginner road cyclists, combining great value with trickle-down technology from Shimano's top-tier groups. - Cage is optimized for disc brake road bikes - Integrated cable tension adjustment for precise and easy adjustments - More frame cable routing options

The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD

The Shimano 105 R7000 mechanical brake Dual Control Levers bring quick and intuitive shifting and confidant braking in an affordable package. Features - Redesigned internal shifting unit - Greater reach adjust range - Easier access to inner shift cable - Quick and intuitive rear shifting operation - Reliable performance in race conditions - Lighter front shifting when paired with FD-R7000

Shimano 105 7000-series components offer much of the same technology and functionality as their top-level 11-speed drivetrains at a more budget-friendly price point. The RD-R7000 rear derailleur provides stable shifting performance and wide-range compatibility in two different cage lengths. The Shadow RD design limits the amount the derailleur sticks out from the side of the bike, reducing the risk of it making contact with objects and bending. - Maximum cog size: 30t (SS) / 34t (GS) - Total capacity: 35t (SS) / 39t (GS) - Pulleys: 11t - Chain compatibility: HG-EV 11-speed/HG-X11 - Direct mount compatible

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

Shimano ST-EF500 shift/brake lever provide an ergonomic, integrated solution for both brake and shifting controls. - Optical gear display - Adjustable reach - 4-Finger lever, compatible with cantilever, roller, linear-pull, and mechanical disc brakes

The Shimano EF500 8-Speed dual brake/shift lever features reach adjust technology and an optical gear display. - Equipped with a reach adjust mechanism that allows for the distance from handlebar to lever to be adjusted in order to suit any hand size and riding preference - The optical gear display tells you which gear position is selected while riding - Compatible with V-Brake, Mechanical disc brake (MTB)

Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS

For reliable mountain bike shifting, Shimano's SL-M315 RAPIDFIRE shift lever is suited to quick shifting, giving riders the ability to downshift three gears in one stroke. - Slim main lever body - OPTISLICK for smooth shifting performance - Gear display positioned below the handlebar - Numbered gear display indicates gear position at a glance - Light shifting operation, wider compatibility, and suitable for internal cable routing - Streamlined cockpit experience

The Shimano Altus RD-M310 rear derailleur is a quality, durable replacement rear derailleur for 7 and 8-speed drivetrains. - 13t upper and 15t lower pulleys - Maximum cog size: 34t - Total capacity: 43t