Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$699.00
The all-new Bomber DJ is back in the mix with a whole new bag of tricks. Sharing the same 36mm chassis as its big brother, the Z1, the DJ comes in a dedicated 26" wheel configuration. Featuring a 20x110mm axle, the DJ is designed for maximum stiffness and offers seamless compatibility with existing DJ and DH front hub spacing standard. - Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end - Legendary Bomber durability with 36mm stanchions - Buttery and easy-to-use GRIP damper - Tapered steerer tube for maximum stiffness - Adapters available for 15 x 100mm axle - 1.5 Tapered steerer - Offset: 37mm
$550.00
Sprint-worthy stiffness meets climb-friendly weight in SRAM's RED 22 Crankset. Its hollow carbon construction minimizes weight and maximizes stiffness while the chainrings attach with a hidden 5th bolt that uses the crank arm as the mounting point to further increase the stiffness and shed weight. The X Glide R chainrings start out as 5mm-thick aluminum plates and are precision machined to eliminate all unessential material while retaining extreme stiffness. Then, they are carefully ramped and pinned to provide lightning fast shifts. With so much great technology and 11-speed compatibility, your competition with be RED with envy.
$549.95
With more than 40 years of designing and building bicycles and components dedicated to adventures that go beyond limits or expectations, Tom created the new Ritchey WCS Adventure Fork for those of us that are unbound by the constraints of riding-surface type, seemingly insurmountable distances, or what you can carry on your bike. The new one-piece carbon monocoque WCS Adventure Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, deliver a high level of comfort, and offer practical features for all manner of cycling adventures. Built with High Modulus Fiber (HMF), this impeccable adventure fork offers superior strength while also reducing road chatter fatigue on those endless days and nights in the saddle. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from the crown to the shaft and offers increased impact strength for those potholes you didn't see. With your desire to ride far and long in any condition or under any circumstance, the WCS Adventure Fork features rack mounts for packs full of gear and fender mounts to keep the grime off you and your bike. The three multi-purpose mounts on the legs give you more places to stow the necessities you gather at the last cafe. Welcoming flat-mount disc brake calipers, the WCS Adventure Fork also fits up to 48mm tires (depending on tire make and model)—making this fork the ultimate addition to any rig assembled for the purpose of seeking, discovering, and enjoying the adventure. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included)—(100x15mm thru-axle conversion kit available separately) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Axle-Crown: 393mm - Rake/Offset: 50mm - Spacing: 60mm - Minimum tire clearance: 4mm Road / 6mm Off-Road - Wheel compatibility: 700c / 650b - Rack and fender mounts - Multi-purpose mounts on fork blades (includes black stainless-steel bolts) - Fork max payload: 3kg per side - Weight: 445g (with uncut steerer / not including axle)
$529.95
Tom Ritchey was riding off-road decades before gravel riding was ever a "thing," and the new WCS Carbon Cross Gravel Fork is the manifestation of the experiences enjoyed on all of those dirty rides mixed with the legendary engineering for which Ritchey is famous. Built from life and ready for your drop bar off-road adventures, this full monocoque carbon fork delivers precision and confidence while offering stability and comfort along some of the more rugged terrain you'll encounter. With logical features—like enough room tires up to 40mm wide, the ability to run 12 or 15mm thru-axles, and ability to run flat-mount disc brakes—the Ritchey WCS Cross Gravel Fork is ideal for long-distance gravel events, your local cyclocross series, spontaneous weekend adventures, and everything in between. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Crown diameter: 47mm - Axle-Crown: 383mm - Rake/Offset: 47mm - Spacing: 53mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Weight: 430g (with uncut steerer / not including axle)
$525.00
The XX1 Eagle Fat Bike DUB crankset has been re-examined and re-engineered. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon-tuned lay-up crank design provides extreme stiffness and light weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fat bike frame compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 190/197 Hubs
$525.00
The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat-mount disc brakes - Fender eyelets on outside of fork leg for easy mounting - 700c x 42mm or 650B x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches - Includes thru-axle and Whisky Parts Co. compression plug
$450.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
$419.99
- Manufactured from UD Carbon with matte clearcoat - Handmade in Canada - SixC G2 Pedal Insert for increased Rally Factor - Burlier 7050 Spindle - Cinch technology for game-changing compatibility
$399.99
Vector M30-P cranks have a stiff, cold-forged, 30-millimeter, 7075 aluminum alloy, Praxis M30 spindle that fits frames with European bottom brackets, paired with an oversized, hollow-forged arms and 104 BCD spider. - Super-stiff cold-forged 7075 aluminum alloy - Crank Length: 175mm - Spindle and Crank Arm Material: Aluminum - Weight: 26.6oz - Drive Side Compatibility: Right Hand Drive - Crankset Style: 2-Piece - BB Style: Euro - Chainring BCD: 104 - BB Included: Yes
$349.00
The e*thirteen e*spec Race Carbon Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These carbon crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self extractor bolt is built into both arms for easy removal - World-Cup DH-rated layup and construction - Compacted carbon fiber with an additional 3k added to front and rear faces of crank for impact resistance - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No
$273.99
The RD-M9100 XTR rear derailleur is intended for use with 1x drivetrains. It is compatible with both 11- and 12-speed cassettes. - Decreased rear derailleur tension at low gear position, to prevent high chain tension - Added bumper at rear derailleur pulley cage - Bigger 13T pulley - Direct mount compatible - Compatible cassette size: 10-51 (12-speed), 10-45 (11-speed) - Total capacity: 35t (GS Medium Cage) / 41t (SGS Long Cage)
$270.00
- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish - Seat Post Diameter: 31.6mm - Seat Post Length: 400mm
$269.00
- Clearly defined bite point and maximum power make it the first choice for gravity and high-speed pilots - 1-finger HC lever blade modulates the enormous braking power as desired - Suitable for mounting left or right
$262.99
The Shimano GRX Dual Control Lever delivers light and responsive shifting for mixed-terrain riding. The ergonomic shifter design improves comfort, and the textured, anti-slip brake lever increases control on bumpy terrain. - Excellent heat dissipation - Flat mount - Convenient tool access - Simple wheel replacement - Easy and clean bleeding system - Never hesitate to tackle rough surfaces - Simple set up and maintenance - Gravel inspired lever and bracket ergonomics - Anti-slip brake lever - Greater mixed-terrain control - Same light shifting operation as top tier road systems
$262.00
The Supersonic bracket (previously know as the J5) is the first and premier model of the new generation Profile Design brackets. It offers easier adjustments and a greater fit range than anything that came before it. Paring this bracket with the ergo armrest offers industry leading fit options and greater comfort. Performance The Supersonic/Ergo platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments. Fit Data - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 58.5mm (no riser kit) to 138.5mm in 5mm increments (With aftermarket Riser Kit) - There are 80 distinct position options achievable just by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. Origin - The Supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made. - The Ergo armrest is an integral part of the overall adjustability scheme. The dual - offset design (shared with Race and Boom armrest) gives the most precise adjustment range of any armrest on the market. This, along with the evenly curved shape, allows it to work well for the majority of riders. Extensions - Extension Shape: The 50c extensions offer a 50 deg ski bend shape with a 7.5mm (per side) lateral shift. This allows a neutral wrist angle with the capability to fine tune the grip width. They are 400mm long and can be cut to suit nearly every rider. They are drilled for rear-exit cable routing. - Bracket: Supersonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added)
$214.99
The Shimano GRX Dual Control Lever delivers light and responsive shifting for mixed-terrain riding. The ergonomic shifter design improves comfort and the textured, anti-slip brake lever increases control on bumpy terrain. - Gravel-inspired lever and bracket ergonomics - Anti-slip brake lever - Greater mixed-terrain control - Same light shifting operation as top-tier systems
$209.95
State-of-the-art SuperLogic construction where weight-to-performance superiority is the ultimate object. The SuperLogic Rizer bar is the best MTB handlebar for those looking for the lightest set up possible for their XC rig. - Carbon monocoque - 15mm rise - 9 degree sweep - Width: 710mm - 31.8mm center section - Not bar end compatible - Matte UD carbon finish - Weight: 145g
$199.00
The Highline 3 delivers infinite adjustment, smooth feel, and easy installation. Details - Premium Trelleborg sealing - Exclusive Igus LL-glide bearings and keys - Jagwire cable and housing - Self-contained hydraulic cartridge delivers industry-leading quality and reliability - Internal routing - Quick connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt standard head - Remote sold separately
$197.95
- Optimized 11-speed tooth design for shifting speed and fluidity. Evolved sprocket timing reduces stress on the chain and allows for easier shifting through the higher cogs - Top six cogs are divided into sets of three and are mounted on aluminum carriers. This increases rigidity by 180% and the individual cogs are 70% more resistant to torsion - Cogs are steel with a nickel-chrome treatment - Only compatible with 2015+ mechanical drivetrains and no EPS, due to chain wrap capacity Cassette Body Type: Campagnolo 10/11-speed Cassette Cogs: 11-12-13-14-15-17-19-21-23-26-29 Cassette Spacing: Campagnolo 11-speed Range: 11-29 Weight: 230g
$196.00
The SRAM Force AXS Crank Arm Assembly features carbon crank arms that are ready to pair with any SRAM AXS spider or integrated chainring, with or without power. - 8-bolt interface is compatible with power and non-power AXS spiders and integrated chainrings - Not compatible with SRAM's 3-bolt direct mount interface - Carbon fiber arms with natural carbon finish - Spider and chainrings sold separately - DUB spindle interface - Compatible with all SRAM Road DUB bottom brackets - Number of Chainrings: No Rings, No Spider Included - Crank Intended Use: Road - Pedal Spindle: 9/16" - Spindle Interface Type: SRAM DUB - Chainring BCD: Direct Mount SRAM - BB Included: No
$194.99
The Shimano GRX BL-RX600 shifter offers greater rider control for mixed-terrain riding thanks to Shimano's category-leading hydraulic disc brakes. Lighter shift action and gravel-specific ergonomic shape offer more control on bumpy terrain. - Gravel-inspired lever and bracket ergonomics - Anti-slip brake lever - Greater mixed-terrain control - Designed to be used with a 1x gear setup
$190.00
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. LARGER CONTACT AREA - The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
$185.90
- Chrome lugged crown with Tange CrMo legs/steerer - 41mm rake - Axle-crown: 365mm - Brake mount: caliper - Steerer: straight - Wheel (legs): 700c (curved)
$185.00
The Dagga is our brand new DH pedal. It was designed in collaboration with Chris Kovarik – one of the forefathers of downhill and flat pedal riding. Kovarik’s unique and high-impact riding style inspired the Dagga’s key features – our largest platform and widest stance ever. - Meant to be ridden with thick-soled shoes, the Dagga offers improved stability, power and articulation of the bike. - The Dagga features the same high strength chromoly axle system as other models with a double seal, inner bushing and outer cartridge bearing. - Largest Q-Factor, largest body, longest and largest amount of pins!
$183.00
The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Stack: 60mm to 70mm in 5mm increments (with aftermarket Riser Kit) - Extension length and rotation can be easily adjusted using the top bolt - Weight: 545g
$179.99
Gold standard carbon seatpost for converting road bike frame geometry into a more aggressive aero position. Profile's Fast Forward Carbon Seatpost effectively changes a 73-degree seat tube angle to 78 degrees and moves your saddle forward up to 38mm. Made with multi-layer, multi-directional carbon weave, the Fast Forward is super light, too. Plus, its double-bolt micro-adjustable clamp is easy to use and super secure.
$179.90
- Lightweight, CNC machined, anodized aluminum NJS-certified Track chainring. - 1/2" x 1/8"
$179.00
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 35c is a 35° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35c is a straight 35° bend. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 400mm - Outer Diameter: 22.2mm - Construction: Carbon - Weight: 262g/pair
$179.00
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 45/25c is a 45° / 25° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - The 45/25c extensions have a first section at 45° and the grip at 25°. The rider can choose whether to hold high for the shrugged position or low for a more open, head up position. - The 45/25a offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. Origin - Recent trends in aerobar fit have been towards higher hand positions, so we've increased the rise compared to previous generation extensions. We have focused on the most popular angles from our previous range and added the 45/25c as a multi position option. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 400mm - Outer Diameter: 22.2mm - Construction: Carbon - Weight: 242g/pair
$160.00
Among Brooks' most loved products, the B67 S women's saddle has inspired generations of cyclists to explore the open road on two wheels. The B67 S uses a women's-specific shape, and single saddle rails for increased compatibility with modern seat posts. It's an ideal all-rounder for cyclists who like their handlebars higher than their saddles, perfect for city riding or weekend adventuring. And, of course, the B67 S features Brooks' full-grain, premium leather, and trademark rivets for the ultimate in comfort, style, and durability.
Page 1 of 11 Next page